VMC850 China high-speed precision CNC vertical machining center VMC with 24tools
1.Features
- Disc type manipulator ATC efficiently improves machine working efficiency.
- XYZ-axis adopts precision roller linear guide-way, which is with big load capacity, realize rapid movement, and ensure position accuracy.
- Ultra-large "λ" type column design ensure best stability of column and spindle assembly.
- Built- - in type and high rigidity
spindle ensure high precision and high efficiency cutting features.
- Wide and solid bed and thickened and lengthened saddle ensure machine with high stability andheavy-duty cutting features.
- XYZ- -axis adopts precision double -nut ball-screwtransmission, and imported special bearing, pre-
load assembly, all factor sorganize high rigidity and stable ransmissin system.
2.SPECIFICAITONS
SPECIFICAITONS |
UNIT |
VMC850 |
Worktable |
Table size |
mm |
1000x500 |
T slot(number/width/distance of T-slot) |
mm |
5-18-100 |
Centre distance |
mm |
100 |
T-Width |
mm |
18 |
Max. load of worktable |
kg |
500 |
Machining range |
Longitudinal travel |
mm |
850 |
Cross travel |
mm |
500 |
Vertical travel |
mm |
500 |
Spindle |
Spindle nose to table surface |
mm |
110-610 |
Spidle axis to column surface |
mm |
560 |
Spindle taper |
-- |
BT40 |
Speed Range |
rpm |
40-6000 |
Max.spindle torque |
N.M |
26.3 |
Motor |
Spindle motor power |
kw |
7.5 |
Feed motor (X/Y/Z) |
KW |
1.8 |
Feed |
Cuttiing feed X/Y/Z |
mm / min |
10-10000 |
Rapid feed X/Y/Z |
m / min |
30/30/24 |
Tool magazine |
Tool magazine capacity |
piece |
16 |
Tool magazine type |
-- |
Carousel |
Max. tool diameter (full) |
mm |
130 |
Adjacent socket empty |
mm |
|
Max. tool length |
mm |
|
Max. tool weight |
kg |
8 |
Tool changing time (tip to tip) |
s |
3 |
Accuracy |
Positioning accuracy |
mm |
±0.005/300 |
Repeat positioning accuracy |
mm |
±0.003/300 |
Others |
Air pressure |
Mpa |
5---6 |
Overall dimension |
mm |
2500x2600x2300 |
Machine weight |
kg |
5500 |
3.Configuration:
Vertical machining center VMC850 |
ITEM |
DESCRIPTION |
1 |
Model |
VMC 850 |
2 |
Color |
BLACK AND WHITE |
3 |
Voltage |
380V 50HZ 3PH |
4 |
Spindle |
Taiwan spindle BT40/10000RPM (highest speed 10000rpm) |
5 |
Axis |
X,Y axis Taiwan or Germany linear guide ways and Z axis Harden box type |
6 |
Leadscrew |
Taiwan or Germany ball screws |
7 |
Tool magazin |
Taiwan round type tool magazine with 24 tools |
8 |
Bearing |
Germany FAG bearings |
9 |
Linear guideway |
Taiwan linear guideway |
10 |
Other configuration |
spindle blowing chip removal system |
spindle air curtain protection |
auto centralized lubrication system |
rigid tapping |
two water cooling, one air cooling |
electrical hand wheel, working lamp, RS232 interface, alarm light |
DNC online processing |
CE Electrical |
4.Standards Accessories:
- Rear chip-removal full-closed cover without chip removal device
- Drawer type coolant tank and chip box
- Rear chip flushing device
- Full-function operation panel and MPG
- ATC
- Belt transmission type spindle
- Air flow coolant system at the side of spindle
- Heat exchanger for electrical box
- Working area cleaning air and water gun
- Working light and alarm light
5.Optional Accessories:
- Front chip-removal full-closed cover with chip removal device
- Water flow through spindle
- Three-axis linear guideway
- 4 axis function
- Oil coolant type spindle
- Direct connected spindle
- Oil and water separator
- Working-piece and tools measuring device
- Open-door power off function
- High speed and precision function
- Heightened column(bridge type or rising block)
6.Warranty:
What about the spare part if the CNC Vertical Machine Center Vmc Machine break down?
==about CNC Vertical Machine Center Vmc Machine break down, normally our policy will be as the under way
1) Our quality guarantee time is 12 months since the machine on board
2) During this period, if the machine break down owing our machine itself quality problem, we will prepare the spare parts and send to you by free within 5 days. all these will be by free.
3) If the break down is caused by the mis operation, we of course will supply you the spare parts, but we have to charge you the costs prices.
Welcome to contact us!
Tengzhou Uni-tech Co. Ltd
Tel:+86-0632-5810219
Ph:+86 13963270211