Heavy Duty 105mm Spindle Bore metal 3000mm Lathe
Features:
This series machine is suitable for turning inside and outside the cylinder, cone and other surface of revolution. Cutting all kinds of the metric system, the inch thread, the modulus and the, and and can perform drilling, etc.
Structure features:
1. CA series products, with "A" type as the base type, derive several deformation products. B: spindle diameter 80 mm, type C: spindle diameter 104 mm. F: hydraulic copying. M type: precise.
2. The lathe bed width in the general lathe, has high rigidity, guide surface after medium frequency quenching, durability.
3. The machine tool operation spirit concentration and skateboard has fast moving mechanism. Using single handle visualization operation, should be good human nature.
4. The machine tool structure stiffness and transmission stiffness were higher than the general lathe, high power efficiency, suitable for high speed cutting. Main shaft aperture is large, can choose accessories complete.
Detailed Specifications of Heavy Duty 105mm Spindle Bore metal 3000mm Lathe
| Heavy Duty 105mm spindle bore diameter 3000mm length Lathe Machine |
CA6140 CA6240
CA6140B CA6240B |
CA6150 CA6250
CA6150B CA6250B
CA6150C CA6250C |
CA6161 CA6261
CA6161B CA6261B
CA6161C CA6261C |
CA6166 CA6266
CA6166B CA6266B
CA6166C CA6266C |
CA6180 CA6280
CA6180B CA6280B
CA6180C CA6280C |
| Max. Swing over bed |
400mm |
500mm |
610mm |
660mm |
800mm |
| Max. Swing over carriage |
210mm |
300mm |
370mm |
400mm |
540mm |
| Max. Swing in gap |
---- |
630mm |
---- |
720mm |
---- |
830mm |
---- |
880mm |
---- |
1020mm |
| Effective gap length |
---- |
210mm |
---- |
210mm |
---- |
210mm |
---- |
210mm |
---- |
210mm |
| Max. length of work piece |
500mm or 750mm or 1000mm or 2000mm or 2200mm or 3000mm or 4000mm |
| Width of bed |
400mm |
| Section of turning tool |
25mm x 25mm |
| Spindle hole |
52mm (80mm)[ Φ 105] |
| Spindle taper |
Morse No. 6(MT6)( Φ 90 1: 20)[ Φ 113 1: 20] |
| Number of feeds |
64kinds (for each) |
| Range of metric threads (kinds) |
(1-192mm) (44 kinds) |
| Range of inch threads (kinds) |
(1-24tpi) (21 kinds) |
| Range of module threads (kinds) |
0.25-48(module 39 kinds) |
| Range of pitch threads (kinds) |
1-96DP (37 kinds) |
| Max. tailstock spindle travel |
150mm |
| Tailstock spindle diameter |
75mm |
| Taper of tailstock spindle center hole |
MT5 |
| Main motor |
7.5kw (10HP) |
Standard accessories
3-Jaw chuck, 4-Jaw chuck,
steady rest, follower rest, face plate,
longitudinal automatic trip, coolant system,
brake system,thread index (dial),
Dead center, Oil gun, Leviling pads,
Drive plate, operation manual
Optional accessories
DRO
Quick change toolpost
Chuck protection
Leading screw guard
Toolpost protection
Detailed pictures:
We also would like to let you know our warranty about our Heavy Duty 105mm spindle bore diameter 3000mm metal Lathe as following:
What about the spare part if Heavy Duty 105mm Spindle Bore metal 3000mm Lathe break down?
==about the machine break down, normally our policy will be as the under way
1) Our quality guarantee time is 12 months since the machine on board
2) During this period, if the machine break down owing our machine itself quality problem, we will prepare the spare parts and send to you by free within 5 days. all these will be by free.
3) If the break down is caused by the mis operation, we of course will supply you the spare parts, but we have to charge you the costs prices.
Welcome to contact us!
Canthy Guo
Tengzhou Uni-tech Co. Ltd
Tel:0632-5810216
Ph:0086-18266249928
Audited Supplier 
){kind=link}