CK6136D flat bed cnc lathe machine
Xaxis and Z axis are controlled by the semi-closed loop. It is drived by the servo motor to drive the precision ball leadscrew to achieve fast shifting and rapid feeding. Ball screw is C3 degree with high precision.
All electric part all passed CE approve.The machine with 4 position tool post which brand is very famous in China, high positioning accuracy, high strength, good shock resistance.Before machine leaving factory, every machine will be tested by by laser interferometer for positioning accuracy and repeatability accuracy of X AXIS and Z AXIS to ensure machine's precision.Machine adopts Centralized lubrication of famous brand "HERG"from Japan. headstock lubrication adopts Taiwan Po Teng cycloid pump forced circulation lubricationThe bed adopts Resin sand molding, high-quality cast iron casting,
width of bed 312mm, guide way fired depth is up to 3mm, improving wear
resistance and stability
Spindle structure using front and rear ends of the typical structure of two points of support, with high rigidity.Main drive for the second gear stepless frequency control, speed range of 21 ~ 1600r / minThe design of headstock fully consider the cooling measures and shock absorption mechanism, making headstock with low noise, high precision transmission characteristics.Machine with electrical overload protection devices, mechanical overload protection devices and control of the spindle rotation of the emergency stop devicemachine with standard 200mm manual 3-jaw chuck from Hohhot
Optional is hydraulic chuck.
X-axis and z-axis feeding and rapid moving realized by ball lead screw driven by SERVO motor
X-AXIS leadscrew dia. 20MM, Z-axis leadscrew dia. 40mm, In the brand of HANJIANG
Machine use ISO international standard CNC G code, while compatible with Japan Fanuc (FANUC) CNC system. Domestic mainstream programming, to facilitate the operator faster and easier to use the system.
1. GSK 980TDC CNC controller
2. 3- jaw manual chuck diameter 200mm with flange
3.center MS GB9204.1-88
4. Electric Lubrication
5. 4 Positions tool post
6. Work light
7. double ended wrench, hexagonal wrench, square box wrench,hook spanners.
9. manual tailstock
10.hand push oil gun
11. foundation bolts
12.English operation manaual of machine, automatic lubrication device instruction,
CNC SYSTEM instruction,quality passed testing booklet.
1. FANUC or SIEMENS CNC controller
2. Spring fastener
3. 6 positions tool post
4. hydraulic tailstock
5. hydraulic chuck
|Max .Swing over bed||360mm||400mm|
|Max.swing over carriage||200||240|
|Max.length of work piece||750/1000mm|
|width of bed||312mm|
|section of turning tool||20x20mm|
|Thru-hole of spindle||52mm|
|Spindle speeds (stepless)||independent spindle 100-1600rpm|
|Tailstock center sleeve travel||90mm|
|Tailstock center sleeve taper||MT4|
|X/Z rapid traverse||3/6m/min|
|(L*W*H mm) for 750|
|(L*W*H mm) for 1000|
|Weight(kg) for 750||1300kg||1600kg|
|Weight(kg) for 1000||1400kg||1700kg|