Pipe Screw-Cutting Lathe machine (Q270)
Pipe threading lathe is mainly used to cut metric, brit ish system column, taper pipe thread,
It's can also be used as a plain lathe, machining ex-circle, bore taper hole inside and outside.
Applying to oil, metallurgy, chemical industry, wanter and electricity, geological in machining the tubing,
Casing, drill pipe etc.
Packing: Iron pallet and case
| SPECIFICATIONS |
|
pipe screw-cutting lathe (Q270) |
| OVERALL DIMENSION |
| LENGTH 3553mm |
WIDTH 1450mm |
| HEIGHT 1505mm |
WEIGHT 5300kg |
| MAIN SPECIFICATION |
| MAX. SWING OVER BED 800mm |
PIPE DIA. 70-273mm |
| MAX. SHAFT LENGTH 1000mm |
MAX. MACHINING TAPER 1:4 |
| Bed width |
700mm |
|
| MAX. TRAVEL FOR THE TAPER SHAFT 930mm |
| SPINDLE |
| SPINDLE HOLE 280mm |
SPINDLE SPEED STEPS 9 |
| SPINDLE SPEED RANGE 7.7-230r/min |
|
| FEEDING SYSTEM |
| 18 |
| |
| THREADING RANGE FOR METRIC 4 |
CROSS FEEDING RANGE 0.04-0.65mm |
| THREADING RANGE FOR INCH 6 |
LONGITUDIAN FEEDING RANGE 0.1-1.46mm |
| SCREW PITCH FOR METRIC THREADS 2\3\4\6mm |
| SCREW PITCH FOR INCH THREADS 4\5\6\8\10\12t.p.i |
| LONGITUDINAL RAPID MOVING SPEED 2.5m/min |
| 0.20mm |
| TOOL POST |
|
| MAX. TRAVEL FOR THE TOP SLID 210mm |
SHAFT SECTION SIZE 30×30mm |
| ANGLE FOR TOOL POST PLATE ±90° |
|
| TOOL POST TRAVEL PER ONE TIME TURN FOR THE SCALE 0.05mm |
| TOOL POST TRAVEL PER ONE TURN FOR BOTTOM SCALE PLATE 0.1mm |
| DISTANCE BETWEEN SPINDLE SHAFT AND TOOL POST MOUNTING 33mm |
| TAIL STOCK |
| QUILL DIA. 100mm |
QUILL DIA. TRAVEL. 250mm |
| TAPER OF QUILL DIA. MT 6 |
CROSS MOVE FOR TAIL STOCK ±15mm |
| CENTER TAPER 6 |
| MOTOR |
| GEAR PUMP BELT 1-A800 |
RAPID MOTOR 2A0S5632 0.37KW 2700r/min |
| MAIN MOTOR BELT B1854 |
CLAMPING MOTOR 1.5KW2860r/min |
| GEAR PUMP CB-B6 2.5Mpa 1450r/min |
MAIN MOTOR 15KW 1460r/min |
