Engine Lathe C6280 Heavy Duty Lathe And Conventional Lathe
Features2 Axis digital readout systemTaper turning attachment fitted to saddleTriple bearings supporting headstock spindleQuick change toolpost with additional holdersAdjustable taper roller bearings providing spindle accuracyPrecision 'V'-beds & headstock gears are all hardened & groundMultiple discs forward and reversing clutch systemOverload protection on drive motor and coolant systemUniversal enclosed gearbox incorporating metric & imperial thread capabilitiesFoot operated spindle brake with safety cut out switchX & Z axis rapid traverse selection lever incorporated on the saddle @ 4.5m/min400mm wide induction hardened heavy duty cast iron bedRemovable gap bed allowing work piece to swing up to 900mmCross slide handle disengages when auto feed is usedSaddle hand wheel disengages when auto feed is usedAdjustable clutch for auto feeds protects machine from overloading during machiningChuck guard fitted with safety micro switchMicro switch on side access doorPowered longitudinal and cross feedsMetric / imperial calibrated feed dialsCoolant system with flexible hose enabling flow control & directionOil sight glass for head stock and gearbox & apronLubrication pump on saddle oiling slidesLow voltage halogen work light
| MACHINE TOOL TYPE |
GH-6266A |
GH-6280Q |
| CAPACITY |
| Swing Over bed |
Φ660mm |
800mm |
| Swing Over Cross Slide |
Φ440mm |
Φ570mm |
| Swing in Gap Diameter |
Φ900mm |
Φ1035mm |
| Length of Gap |
250mm |
| Center Height |
330mm |
| Distance Between Centers |
1500mm/2000mm/3000mm |
| Width of Bed |
400mm |
400mm |
| Max. Section of Tool |
25mm × 25mm |
| Max. Travel of Cross Slide |
368mm |
420mm |
| Max. Travel of Compound Rest |
230mm |
230mm |
| HEADSTOCK |
| Spindle Bore |
Φ105mm |
| Spindle Nose |
D1-8 |
| Taper of Spindle Bore |
Φ113mm(1:20)/MT5 |
| Spindle Speed Number |
16 |
| Range of Spindle Speed |
25~1600rpm |
25~1600rpm |
| FEEDS AND THREADS |
| Leadscrew Pitch |
Φ40mm×2T.P.I. or Φ40mm×12mm |
| Inch Threads Range |
7/16~80T.P.I. (54 kinds) |
| Metric Threads Range |
0.45~120mm (54 kinds) |
| Diametrical Pitches Range |
7/8~160DP (42 kinds) |
| Module Pitches Range |
0.25~60MP (46 kinds) |
| Longitudinal Feeds Range in Metric Lead Screw |
0.044~1.48mm/rev (25 kinds) |
| Longitudinal Feeds Range in Inch Lead Screw |
0.00165"~0.05497"/rev (25 kinds) |
| Cross Feeds Range in Metric Lead Screw |
0.022~0.74mm/rev (25 kinds) |
| Cross Feeds Range in Inch Lead Screw |
0.00083"~0.02774"/rev (25 kinds) |
| TAILSTOCK |
| Quill travel |
235mm |
| Quill diameter |
Φ90mm |
| Quill taper |
MT5 |
| MOTOR |
| Main motor power |
7.5kW(10HP) |
| Coolant pump power |
0.09kW (1/8HP) |
| DIMENSION AND WEIGHT |
| Overall Dimension (L×W×H) |
321/371/471cm×123cm×160cm |
321/371/471cm×123cm×167cm |
| Packing Size (L×W×H) |
324/374/474cm×114cm×184cm |
324/374/474cm×114cm×191cm |
| Net Weight |
3060/3345/3710kg |
3220/3505/3870kg |
| Gross Weight |
3535/3835/4310kg |
3705/4005/4480kg |
Standard accessories:
Rapid feed longitudinal and cross3-jaw chuck steel PO3-315 mm /
D8Independent chuck K72-400 mm /
D8Face plate 500 mm
Steady rest - Passage up to max. 180 mm
Follow rest - Passage up to max. 100 mm2
dead centers
Foot pedal with brake function according to CEInitial filling with Shell Tellus 46Safety clutch
Coolant devicemachine
light
Change gears
Morse taper
drill sleeve
Splash guard
Cable guide by energy chainTools
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}